The 3-D Frankie Monster Glow Glass Bong is a glass water bong for home use. The water in the bottom makes the inhalation softer.

This is a stationary accessory: it stands vertically on a table or shelf and requires a permanent location.

Characteristics

Material: glass
Height: 32 cm
Glass thickness: 7 mm
Filtration: water

How a water bong works

Water is poured into the bottom of the body. When you inhale, the smoke descends into the water, bubbles through it, and only then rises to your mouth. The water takes away some of the heat, so the smoke is cooler and easier on the throat than dry smoke.

As the smoke passes through the water, it breaks into bubbles, and the smaller the bubbles, the longer the smoke is in contact with the water. The path of the smoke also matters: the longer it is from the water to the mouth, the more time the smoke has to cool.

The smoke overcomes a layer of water, so the inhalation requires a little more effort than through a dry pipe, and works better when it is smooth. A compact pipe is simpler and takes up less space, but the smoke goes straight through it. In contrast, a bong inhalation comes out softer.

Glass features

Glass is tasteless, does not react with water, and does not retain odor, so the taste does not accumulate from one use to the next. The material also has a downside: glass breaks when hit or dropped, so it is better to move the bong with both hands, and hold the body while inhaling.

Where to put the bong

A 32 cm high bong requires space not only on the table but also above it. A bong may not fit under a low shelf or wall cabinet, so it is better to measure the free height in advance.

The surface should be flat and stable, away from the edge of the table and away from the aisle where the bong can easily get caught with an elbow. On a smooth table, you can place a non-slip mat under the base: this will hold the bong in place and collect splashes.

How to use

Place the bong vertically on a flat surface. On a sloped surface, the water will sit at an angle and the level you pour will not be accurate.
Pour water into the bottom of the case.
Use clean water without any foreign odor: the taste of the water will be transferred to the smoke. Cool water cools the smoke more than warm water.
Press your lips tightly to the edge of the neck, light the herbs in the bowl and at the same time take a slow, even breath: the smoke passes through the water only when you inhale. This way the bubbles remain small and the water does not splash out. A sharp pull knocks it into spray.

The resistance of inhalation depends on the water level, so take your first few inhalations slowly to feel how the bong reacts.

Who will it suit?

For those who are switching from a compact tube to a water format and using it at home.

Bongs/Bubblers
Height	32 cm
Material	Glass
Thickness	7 mm

Write a review

If you have any questions, please write to us:

Telegram @uatravacom
Call +38 (099) 226 11 93 or write to Viber , WhatsApp
To our email: [email protected] or in the Feedback Form
In the online chat is located in the lower right corner of the site

We do not provide consultations on growing and sprouting souvenir products, if you are interested in this information, you can easily find it on the Internet

Frequently Asked Questions about the 3-D Frankie Monster Glow Glass Bong

How much water should I pour?

The bottom of the tube should be in the water, and there should be a margin up to the neck. This will prevent water from entering your mouth when you inhale. If the water rises to the neck, there is too much water, and you should drain some.

What to do with a bong before first use?

Carefully remove it from the packaging and examine it in the light: the glass should be free of cracks and chips, especially around the edges. Then rinse with warm (not hot) water, let it drain and dry on a clean towel. After that, you can fill it with water for the first use.

Can a new bong have an odor or taste?

Sometimes a new product will smell like packaging or have dust from the warehouse on the surface. This is not caused by the glass itself and will disappear after the first wash. If the smell remains, rinse the bong thoroughly again with clean water and dry it.

How to choose additional accessories for a bong?

The main thing is that the accessory fits the size of the connection. Before buying a bowl, adapter or other parts, clarify this parameter with the seller and compare it with what is indicated on the accessory. Parts with the wrong size will fit loosely, wobble and can damage the glass.

How to transport a bong safely?

Before traveling, drain all the water and let the glass dry. Wrap the bong in a soft cloth or bubble wrap, place it in a sturdy box, and fill the gaps with soft material to keep it from moving. Do not place heavy objects on top of it or put the bong in luggage that could be thrown.

What mistakes do beginners most often make?

Most often, they leave the water for a few days, place the bong on a slippery surface or the edge of a table, pick it up with wet hands and wash it immediately after use with very hot water. Another common mistake is to put off cleaning until the plaque becomes noticeable. The longer it sits, the harder it is to remove.